Typically, no, our mounts are designed specifically for Ergomart products. Contact Ergomart to determine if you would like assistance.
Talk to an ergo expert: (888) 420-3200 or Email Us
This small flexible mounting kit handles standard arms including the SAA7000 and SAA2045.
The flexible mounting kit can be used in multiple configurations (see specifications tab).
It can be assembled as a desk clamp mount, a wall mount, a thru-desk mount or a reverse wall mount. Additionally, it be used as a box edge style attachment.
Compatible with SAA7000, SAA2010, SAA2045, SAA179 arms.
Don't see what you need? Call for custom mounting solutions to meet your specific configurations.
Mount Kit A is a flexible mount kit that can be configured in one of 4 configurations: Desk Clamp, Through-Desk, Wall Mount and Reverse Wall Mount.
The standard bolt is 2.5 inches. Bolts of 3.5 and 4.5 inches are also available - please call to order.
The standard bolt is 2.5 inches. Bolts of 3.5 and 4.5 inches are also available - please call to order.
Typically, no, our mounts are designed specifically for Ergomart products. Contact Ergomart to determine if you would like assistance.
No and Yes. Since the tilter head pin is a smaller size than the arm pin, you would not be able to do that without installing an adapter bushing into the mount. Contact Ergomart if you wish to purchase the adapter.
Both are nearly identical in form and function. The mount kit A has a smaller base and a shorter neck to accept the shorter pins of some of our arms such as the SAA7000. It will not work with some heavy duty and long reach arms such as the SAA2415.
Contact an Ergomart representative for assistance in selecting the appropriate mounting solution. In most cases it is safe to assume that any arm that offers the MKIT-A as part of a solution is appropriate.
There are two configurations available to secure this can mount to a horizontal surface in three instances (and even more mounting configurations for applications not relevant to the question). It can either be clamped to the edge of a surface, clamped into a grommet hole, or it can be fastened with a nut and bolt through the surface. The clamping option works for surfaces up to 4.25" thick, whereas the through desk option must be between 0.38" and 3.25" thick.
While the wall mount configured Flexible Mounting Kits work well with most arms and light to moderate payloads, the longer more heavy duty arms often perform better with Heavy Duty Wall Mount Kit D. Kit D provides a stronger mounting base which allows for heavier loads and reduces wobble and vibrations. Stability and reduced vibration are important when the arms have keyboard trays and the user keys at the end of the arm.