The family of modular Roller Track (RT) Flush Mounts allows users the ability to install screens as close as possible to the RT Rail while offering useful features such as monitor rotation and tilt, a brake mechanism to immobilize mounts as needed, quick release capability for monitor installation and servicing and monitor rotation stops to help maintain the desired alignment.
All variants of the RT Flush Mounts have extensive VESA support, from 75x75 mm to 400x600 mm, thus providing a wide coverage of available monitors and other compatible equipment. All Flush mounts can be configured with either a 6” Lift and Shift Positioner mount, or a 12” Sliding Trolley mount. The 6” Lift and Shift Positioner is ideal for occasional monitor or equipment repositioning along the rail, whereas the 12” Sliding Trolley is more suited for heavier payloads being moved freely along the track. Optional brake components help keep the mount securely in place when desired. They are engaged by turning a knurled bolt head.
The Roller Track Flush Mounts are grouped into three configurable products: the Movable/Sliding Flush Monitor Mount (RT-FLUSH), the Quick-Release Movable/Sliding Monitor Mount (RT-FLUSH-QR) and the Movable Tilting Monitor Mounts for the Roller Track (RT-ST632). Their features are summarized below.
MOVABLE/SLIDING FLUSH MONITOR MOUNT (RT-FLUSH)
The Movable/Sliding Flush Monitor Mount (RT-FLUSH) offers a low-profile monitor mounting solution with a slim footprint which can handle an impressive weight capacity. The 6” Lift and Shift Positioner option can be set along any part of the RT Track, making it ideal for occasional repositioning of equipment up to 100 lbs. The 12” Sliding Trolley offers a significant improvement in mobility and weight capacity, being able to move up to 125 lbs effortlessly along the track via ball bearing wheels. Optional trolley brake and wire management brackets offer additional flexibility and control over payload position and presentation.
RT-FLUSH
6" LIFT AND SHIFT POSITIONER
Users can position the RT-Flush mount anywhere along the RT Track
This mount is most suited for objects and equipment that may only be occasionally repositioned along the RT Track
Adjustment of mount position is as simple as lifting the payload, moving to desired position, and releasing
The RT Flush mount on 6” positioner is rated for equipment up to 100 lb
RT-FLUSH
12" GLIDING ROLLER TROLLEY
Trolley effortlessly rolls along the RT-Track using ball bearing wheels
Trolley is best suited for equipment needing frequent lateral adjustment or movement along the RT-Rail
Adjustment along the rail is achieved by simply pushing the device to the desired position
12” Trolley is designed to handle payloads up to 125 lb
OPTIONAL BRAKE FOR RT FLUSH MOUNTS
The bracket that enables the brake and wire management features is optional
The brake inhibits unintended equipment movement along the RT-Track
Lock and disengage the brake by turning a knurled bolt head
The brake can also be adjusted with a 5/32 allen socket to access behind monitors when adjustment is needed
OPTIONAL WIRE MANAGEMENT FASTENERS FOR RT FLUSH MOUNTS
The optional bracket provides a means to attach a drag chain designed to contain wires and protect them from damage
Drag chain and troughs sold separately
Helps protect cables and other sensitive equipment components when the track is in use
QUICK-RELEASE MOVEABLE/SLIDING MONITOR MOUNT (RT-FLUSH-QR)
The Quick-Release Movable/Sliding Monitor Mount (RT-FLUSH-QR) offers low-profile VESA compliant monitor mounting with the added flexibility of being able to swiftly and easily attach and remove monitors and other mounted equipment individually from the RT Rail without disturbing any adjacent objects. Each mount is equipped with our Monolok Quick-Release device featuring instant adjustment between landscape and portrait monitor orientations, and the ability to detach by simply pulling a release strap. An optional security screw can be installed to prohibit unauthorized detachment of devices from the rail without a special screw bit.
RT-FLUSH-QR
6" LIFT AND SHIFT POSITIONER
The Flush QR mount is compactly built yet versatile and functional
Various VESA mount options available for compliant monitors
To adjust: lift device or monitor, move and release
Can accept equipment and monitors up to 100 lbs
RT-FLUSH-QR
12" GLIDING ROLLER TROLLEY
Slides along the heavy duty RT track on roller bearings for smooth positioning
Ideal for frequent, one-touch left/right movement
To adjust: push the device to the desired position
Handles equipment up to 125 lb
MONOLOK QUICK-RELEASE ATTACHMENT
Simply align, engage and drop VESA component of the Monolok Quick Release device into its receiver to securely attach the monitor to the track
MONOLOK RELEASE STRAP/SAFETY LATCH
The monitor can be removed by two methods
Pull the release strap to unlatch and remove
Depress the latch to lift the monitor free
Additional security screw optional
Low-Profile, Tilting, Moveable Monitor Mount (RT-ST632)
Our Movable Tilting Monitor Mounts for the Roller Track (RT-ST632) allow users to have a low-profile monitor mounting solution with the option to set preferred viewing angles between 5° up and 15° down and is lockable with the adjustment of a thumbscrew. This sturdy, rugged mount offers mounting capabilities of up to 115 lbs, placing the back of the display at just 3.67" from the mounting surface. The display adapter slots directly into the RT Rail track mount's receiver for convenient and easy monitor installation and removal.
RT-ST632 6” LIFT AND SHIFT POSITIONER
Position anywhere along the track
For equipment not intended to be moved often from it’s position along the rail
Adjustment is as simple as lifting the payload, moving into position, and releasing
This mount is rated to take on payloads up to 100 lbs
RT-ST632 12” GLIDING ROLLER TROLLEY
Roller bearing in trolley allow mount and equipment to glide smoothly along track
Preferable for equipment that would be regularly moved
Simply push the device with hand pressure to desired position on track
Can mount equipment up to 115 lbs
Optional brake limiter immobilizes mount in desired location
RT-ST632 EASY ATTACHMENT/REMOVAL
Simply slide the monitor adapter plate into place by inserting the clips into the receiving slots
Secure brackets together using the included M5 screw
Detach by removing the locking screw and lifting the device upwards
Theft-deterrent security screw and bit kit option available
RT-ST632 TILT ANGLE ADJUSTMENT
Tilt can be adjusted 15° forward and -5° back to optimize viewing angle
Tilt angle is locked in place by tightening the thumbscrew to the side
Please refer to the following reference table to view the specific attributes and features of each of the flush mounts Ergomart has to offer as part of our modular, flexible and adaptable mounting solutions:
SKU
TYPE
INCLUDED VESA SIZE
ROTATION
TILT
QUICK RELEASE
BRAKE
WIRE MANAGER
RTFP-V11-104
Positioner
100x100
No
No
No
Yes
Yes
RTFP-V12-104
Positioner
100x200
No
No
No
Yes
Yes
RTFT-V11-104
Sliding Trolley
100x100
No
No
No
Yes
Yes
RTFT-V12-104
Sliding Trolley
100x200
No
No
No
Yes
Yes
RTFP-QRV75-104
Positioner
75x75
Yes
No
Yes
No
No
RTFP-QRV75-BRK-104
Positioner
75x75
Yes
No
Yes
Yes
Yes
RTFP-QRV100-104
Positioner
100x100
Yes
No
Yes
No
No
RTFP-QRV100-BRK-104
Positioner
100x100
Yes
No
Yes
Yes
Yes
RTFP-QRV12-104
Positioner
100x200
Yes
No
Yes
No
No
RTFP-QRV12-BRK-104
Positioner
100x200
Yes
No
Yes
Yes
Yes
RTFT-QRV75-104
Sliding Trolley
75x75
Yes
No
Yes
No
No
RTFT-QRV75-BRK-104
Sliding Trolley
75x75
Yes
No
Yes
Yes
Yes
RTFT-QRV100-104
Sliding Trolley
100x100
Yes
No
Yes
No
No
RTFT-QRV100-BRK-104
Sliding Trolley
100x100
Yes
No
Yes
Yes
Yes
RTFT-QRV12-104
Sliding Trolley
100x200
Yes
No
Yes
No
No
RTFT-QRV12-BRK-104
Sliding Trolley
100x200
Yes
No
Yes
Yes
Yes
RTFP-ST632-104
Positioner
75, 100, 100x200, 200x200
No
Yes
Yes
Yes
Yes
RTFT-ST632-104
Sliding Trolley
75, 100, 100x200, 200x200
No
Yes
Yes
Yes
Yes
There are two additional options available for building a Roller Track solution.
The Complete Kits offer a convenient approach for selecting every component needed to address one of four commonly encountered usage scenarios with the ability to tailor it to suit a specific work space.
A more flexible approach is found within the complete SERIES-118 modular mounting catalog. It provides many more options to address an even wider range of requirements.
You can browse the many options in our Roller Track catalog or simply call 888-420-3200 or email at [email protected] and an Ergomart product expert will be happy to assist you in building a solution that addresses your requirements.